Contact Us
AmRad Engineering

Manufacturers Representatives

Domestic Manufacturer of AC Capacitors.
  • Power Factor Correction
  • Motor Run Applications
  • HID Lighting Applications

As of January 1, 1999, AmRad Engineering is the largest manufacturer of domestically (U.S.) produced, metal can, oil-filled, motor run capacitors for the HVAC industry.

NEW

Introducing the ... Turbo200

The patented ULTRAMET ® Capacitor

The Universal Replacement Motor Run Capacitor

The 6 built in capacitance values on this one single part permits over 200 single and dual value combinations.
Learn More!

Standard Features

NEW
  • Metallized polypropylene capacitor encapsulated in an oil-filled , terne plate steel (Series V2000/R2000) or aluminum can (Series VA2000/RA2000) with a double rolled steel or aluminum cover to provide a leak proof seal.
     
  •   ULFILE NO. E133000(N) - PER UL810 FOR 10,000 AMP FAULT CURRENT
  • APPROVED BY CANADIAN STANDARD ASSOCIATION - C22.2 NO. 190
  • Capacitors meet both EIA-456-A Standards and Tecumseh Products H-115 Specifications
  • The capacitors are provided with a UL accepted internal current interrupter designed to disconnect the capacitor element if excessive pressure should develop inside the case from misapplication.
  • The terminals (two, three or four blades) are quick disconnect surrounded by terminal insulators meeting minimum spacing requirements per UL-810 specifications.

Visit the Areas Serviced page to see if Chuck Kaufman & Associates, Inc. can service your needs and for direct links to the Corporate WEB sites.

©Copyright 2006, C. Kaufman & Assoc., Inc.. All rights reserved.
Updated: December 2006